
BLADE OS 6.1 Command Reference
BMD00133, November 2009 Chapter 6: Boot Options
399
Uploading a Software Image from Your Switch
You can upload a software image from the switch to a FTP or TFTP server.
1. In Privileged EXEC mode, enter:
Select a port, or press <Enter> to use the default (management port).
2. Enter the name or the IP address of the FTP or TFTP server:
3. Enter the name of the file into which the image will be uploaded on the FTP or TFTP server:
4. Enter your username and password for the server, if applicable.
5. The system then requests confirmation of what you have entered. To have the file uploaded, enter Y.
Selecting a Configuration Block
When you make configuration changes to the Virtual Fabric 10G Switch Module, you must save the
changes so that they are retained beyond the next time the switch is reset. When you perform a save
operation (copy running-config startup-config
), your new configuration changes are
placed in the active configuration block. The previous configuration is copied into the backup
configuration block.
Router# copy {image1|image2|boot-image} {ftp|tftp}
Address or name of remote host: <IP address or hostname>
Destination file name: <filename>
User name: {<username>|<Enter>}
image2 currently contains Software Version 1.5.1
that was downloaded at 0:23:39 Thu Jan 1, 2009.
Upload will transfer image2 (2788535 bytes) to file "image1"
on FTP/TFTP server 1.90.90.95.
Confirm upload operation (y/n) ? y
Comments to this Manuals