VMware VCENTER SERVER 4.0 - GETTING STARTED UPDATE 1 Installation Guide Page 45
- Page / 72
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
VMware, Inc. 45
Chapter 3 Installing vCenter Server Heartbeat
To rename the Secondary server
1 Navigate to Start > Administrative Tools > Services and set the VMware vCenter Server Heartbeat service
to Manual, Stopped, and close the dialog.
2 Right-click the Secondary server image and select Edit Settings.
3 Disable the virtual network adapters for both the VMware Channel and Principal (Public) NICs.
4 Open Network Connections, right-click the Principal (Public) network connection and select Properties.
Select Internet Protocol (TCP/IP) and click Properties.
5 Change the IP address to the match that of the Secondary Mgmt (Management) IP address previously
entered in the Configure Server wizard. Click OK twice to close the dialogs.
6 Navigate to the server’s System Properties, select the Computer Name tab, and click Change to rename
the Secondary server and join a Workgroup. When requested, restart the server.
7 Right-click the Secondary server image and select Edit Settings.
8 Re-enable the virtual network adapters for both the VMware Channel and Principal (Public) NICs.
9 Navigate to the server’s System Properties, select the Computer Name tab, and click Change to join the
domain. When requested, restart the server.
To rename the Primary Server
1 Navigate to Start > Administrative Tools > Services and set the VMware vCenter Server Heartbeat service
to Manual, Stopped, and close the dialog.
2 Navigate to the server’s System Properties, select the Computer Name tab, and click Change to rename
the Primary server. When requested, restart the server.
Post Installation
On both the Primary and Secondary servers, navigate to Start > Administrative Tools > Services and set the
VMware vCenter Server Heartbeat service to Automatic, and close the dialog. See “Post Installation
Configuration” on page 47.
Resulting IP Configuration
After installing VMware vCenter Server Heartbeat on both the Primary and Secondary servers, the IP
addressing configuration should reflect:
When the Primary server is active
Primary (active) server - Principal (Public) IP address and the Primary Management IP address
Secondary (passive) server - Secondary Management IP address
When the Secondary server is active
Primary (passive) server - Primary Management IP address
Secondary (active) server - Principal (Public) IP address and the Secondary Management IP address
VMware vCenter Server Heartbeat Console
To administer a pair of servers you must connect to them through the VMware vCenter Server Heartbeat
Console. VMware vCenter Server Heartbeat Console does not connect until VMware vCenter Server Heartbeat
initializes.
You can start VMware vCenter Server Heartbeat Console from any server in the VMware vCenter Server
Heartbeat Pair.
N
OTE The Primary server is currently configured with the Principal (Public) IP address and should not be
changed.
- Installation Guide 1
- 2 VMware, Inc 2
- Contents 3
- Glossary 67 4
- About This Book 5
- Abbreviations Used in Figures 6
- Getting Started 7
- 8 VMware, Inc 8
- Introduction 9
- Server Protection 10
- Network Protection 11
- Application Protection 11
- Performance Protection 11
- Communications 12
- Managed Switchover 13
- Automatic Switchover 14
- Automatic Failover 14
- Managed Failover 15
- 16 VMware, Inc 16
- Installation 17
- 18 VMware, Inc 18
- Implementation 19
- Common Requirements 20
- Server Architecture Options 21
- Cloning Technology Options 22
- Application Component Options 22
- VMware, Inc. 23 23
- Network Options 24
- Primary Server 25
- Secondary Server 25
- WAN Requirements 25
- Antivirus Recommendations 26
- Deployment Options Summary 27
- 28 VMware, Inc 28
- Overview 29
- Installation Process 29
- VMware VirtualCenter Server 30
- vCenter Inventory Service 30
- VMware, Inc. 31 31
- 32 VMware, Inc 32
- VMware, Inc. 33 33
- 34 VMware, Inc 34
- VMware, Inc. 35 35
- 36 VMware, Inc 36
- 38 VMware, Inc 38
- VMware, Inc. 39 39
- 40 VMware, Inc 40
- VMware, Inc. 41 41
- 42 VMware, Inc 42
- VMware, Inc. 43 43
- Renaming the Servers 44
- Resulting IP Configuration 45
- Add a vCenter Server Group 46
- Add a New Connection 46
- VMware, Inc. 47 47
- 48 VMware, Inc 48
- Installation of Client Tools 49
- 50 VMware, Inc 50
- VMware, Inc. 51 51
- 52 VMware, Inc 52
- Server Heartbeat 53
- Parameter File Elements 54
- VMware, Inc. 55 55
- 56 VMware, Inc 56
- VMware, Inc. 57 57
- 58 VMware, Inc 58
- VMware, Inc. 59 59
- VMware, Inc. 61 61
- 62 VMware, Inc 62
- Windows XP 32 bit SP3 63
- Windows XP 64 bit SP2 63
- 64 VMware, Inc 64
- VMware, Inc. 65 65
- 66 VMware, Inc 66
- Glossary 67
- D Data Replication 68
- F Failover 68
- G Graceful (Clean) Shutdown 68
- VMware, Inc. 69 69
- Q Quality of Service (QoS) 70
- S Security Identifier (SID) 70
- VMware, Inc. 71 71
- V VMware Channel 72
Related products and manuals for Servers VMware VCENTER SERVER 4.0 - GETTING STARTED UPDATE 1
Servers VMware ACE EN-000042-00 User Manual
(423 pages)
(423 pages)
Servers VMware ACE Specifications
(14 pages)
(14 pages)
Servers VMware ACE EN-000042-00 User Manual
(24 pages)
(24 pages)
© 2020, manymanuals.com. All rights reserved. | 5.563 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals